Elevated cobalt levels in metal-on-polyethylene knee megaprostheses: a prospective 1-year cohort study of 56 patients with hip and knee megaprostheses.

BACKGROUND AND PURPOSE: Concerns have emerged regarding elevated levels of cobalt and chromium in patients with metal-on-metal megaprostheses. This prospective study aims to identify systemic cobalt and chromium levels in metal-on-polyethylene knee and hip megaprostheses and their associations with other factors. METHODS: 56 patients underwent knee or hip megaprosthesis surgery at 2 sarcoma centers. Serum cobalt and chromium levels were measured preoperatively and thrice within the first year using inductively coupled plasma mass spectrometry. RESULTS: A statistically significant difference in serum cobalt levels (1.4 ppb; 95% confidence interval [CI] 0.0-3.3) was observed 1 year after knee megaprosthesis surgery compared with preoperative levels. In contrast no difference in chromium levels was observed after 1 year compared with preoperative levels (0.05 ppb; CI 0.0-0.8). An association between younger age, higher eGFR, and increased cobalt levels was observed. No significant correlations were found between ion levels and resection length or the number of modular connections. CONCLUSION: We found elevated serum ion levels in metal-on-polyethylene knee megaprostheses in contrast to metal-on-polyethylene hip megaprostheses. Furthermore, a positive correlation between cobalt and chromium levels, and between cobalt and eGFR was identified, along with a negative correlation between cobalt and age. This study highlights the importance of monitoring systemic cobalt and chromium levels in patients with megaprostheses.

Small design modifications can improve the primary stability of a fully coated tapered wedge hip stem.

Increasing the stem size during surgery is associated with a higher incidence of intraoperative periprosthetic fractures in cementless total hip arthroplasty with fully coated tapered wedge stems, especially in femurs of Dorr type A. If in contrast a stem is implanted and sufficient primary stability is not achieved, such preventing successful osseointegration due to increased micromotions, it may also fail, especially if the stem is undersized. Stem loosening or periprosthetic fractures due to stem subsidence can be the consequence. The adaptation of an established stem design to femurs of Dorr type A by design modifications, which increase the stem width proximally combined with a smaller stem tip and an overall shorter stem, might reduce the risk of distal locking of a proximally inadequately fixed stem and provide increased stability. The aim of this study was to investigate whether such a modified stem design provides improved primary stability without increasing the periprosthetic fracture risk compared to the established stem design. The established (Corail, DePuy Synthes, Warsaw, IN, US) and modified stem designs (Emphasys, DePuy Synthes, Warsaw, IN, US) were implanted in cadaveric femur pairs (n = 6 pairs) using the respective instruments. Broaching and implantation forces were recorded and the contact areas between the prepared cavity and the stem determined. Implanted stems were subjected to two different cyclic loading conditions according to ISO 7206-4 using a material testing machine (1 Hz, 600 cycles @ 80 to 800 N, 600 cycles @ 80 to 1600 N). Translational and rotational relative motions between stem and femur were recorded using digital image correlation. Broaching and implantation forces for the modified stem were up to 40% higher (p = 0.024), achieving a 23% larger contact area between stem and bone (R2 = 0.694, p = 0.039) resulting in a four times lower subsidence during loading (p = 0.028). The slight design modifications showed the desired effect in this in-vitro study resulting in a higher primary stability suggesting a reduced risk of loosening. The higher forces required during the preparation of the cavity with the new broaches and during implantation of the stem could bare an increased risk for intraoperative periprosthetic fractures, which did not occur in this study.

Reoperation risk of periprosthetic fracture after primary total hip arthroplasty using a collared cementless or a taper-slip cemented stem.

Aims: The aim of this study was to determine both the incidence of, and the reoperation rate for, postoperative periprosthetic femoral fracture (POPFF) after total hip arthroplasty (THA) with either a collared cementless (CC) femoral component or a cemented polished taper-slip (PTS) femoral component. Methods: We performed a retrospective review of a consecutive series of 11,018 THAs over a ten-year period. All POPFFs were identified using regional radiograph archiving and electronic care systems. Results: A total of 11,018 THAs were implanted: 4,952 CC femoral components and 6,066 cemented PTS femoral components. Between groups, age, sex, and BMI did not differ. Overall, 91 patients (0.8%) sustained a POPFF. For all patients with a POPFF, 16.5% (15/91) were managed conservatively, 67.0% (61/91) underwent open reduction and internal fixation (ORIF), and 16.5% (15/91) underwent revision. The CC group had a lower POPFF rate compared to the PTS group (0.7% (36/4,952) vs 0.9% (55/6,066); p = 0.345). Fewer POPFFs in the CC group required surgery (0.4% (22/4,952) vs 0.9% (54/6,066); p = 0.005). Fewer POPFFs required surgery in males with a CC than males with a PTS (0.3% (7/2,121) vs 1.3% (36/2,674); p < 0.001). Conclusion: Male patients with a PTS femoral component were five times more likely to have a reoperation for POPFF. Female patients had the same incidence of reoperation with either component type. Of those having a reoperation, 80.3% (61/76) had an ORIF, which could greatly mask the size of this problem in many registries.

Two-stage revision for periprosthetic joint infection after hip and knee arthroplasty.

Aims: Histology is widely used for diagnosis of persistent infection during reimplantation in two-stage revision hip and knee arthroplasty, although data on its utility remain scarce. Therefore, this study aims to assess the predictive value of permanent sections at reimplantation in relation to reinfection risk, and to compare results of permanent and frozen sections. Methods: We retrospectively collected data from 226 patients (90 hips, 136 knees) with periprosthetic joint infection who underwent two-stage revision between August 2011 and September 2021, with a minimum follow-up of one year. Histology was assessed via the SLIM classification. First, we analyzed whether patients with positive permanent sections at reimplantation had higher reinfection rates than patients with negative histology. Further, we compared permanent and frozen section results, and assessed the influence of anatomical regions (knee versus hip), low- versus high-grade infections, as well as first revision versus multiple prior revisions on the histological result at reimplantation. Sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), chi-squared tests, and Kaplan-Meier estimates were calculated. Results: Overall, the reinfection rate was 18%. A total of 14 out of 82 patients (17%) with positive permanent sections at reimplantation experienced reinfection, compared to 26 of 144 patients (18%) with negative results (p = 0.996). Neither permanent sections nor fresh frozen sections were significantly associated with reinfection, with a sensitivity of 0.35, specificity of 0.63, PPV of 0.17, NPV of 0.81, and accuracy of 58%. Histology was not significantly associated with reinfection or survival time for any of the analyzed sub-groups. Permanent and frozen section results were in agreement for 91% of cases. Conclusion: Permanent and fresh frozen sections at reimplantation in two-stage revision do not serve as a reliable predictor for reinfection.

Revision total hip arthroplasty using a modular fluted, tapered revision femoral component and interlocking screws in Vancouver B3 periprosthetic fractures with insufficient bone at the isthmus.

Aims: Revision total hip arthroplasty in patients with Vancouver type B3 fractures with Paprosky type IIIA, IIIB, and IV femoral defects are difficult to treat. One option for Paprovsky type IIIB and IV defects involves modular cementless, tapered, revision femoral components in conjunction with distal interlocking screws. The aim of this study was to analyze the rate of reoperations and complications and union of the fracture, subsidence of the stem, mortality, and the clinical outcomes in these patients. Methods: A total of 46 femoral components in patients with Vancouver B3 fractures (23 with Paprosky type IIIA, 19 with type IIIB, and four with type IV defects) in 46 patients were revised with a transfemoral approach using a modular, tapered, cementless revision Revitan curved femoral component with distal cone-in-cone fixation and prospectively followed for a mean of 48.8 months (SD 23.9; 24 to 112). The mean age of the patients was 80.4 years (66 to 100). Additional distal interlocking was also used in 23 fractures in which distal cone-in-cone fixation in the isthmus was < 3 cm. Results: One patient (2.2%) died during the first postoperative year. After six months, 43 patients (93.5%) had osseous, and three had fibrous consolidation of the fracture and the bony flap, 42 (91.3%) had bony ingrowth and four had stable fibrous fixation of the stem. No patient had radiolucency around the interlocking screws and no screw broke. One patient had non-progressive subsidence and two had a dislocation. The mean Harris Hip Score increased from of 57.8 points (SD 7.9) three months postoperatively to 76.1 points (SD 10.7) 24 months postoperatively. Conclusion: The 2° tapered, fluted revision femoral component with distal cone-in-cone-fixation, combined with additional distal interlocking in patients with bony deficiency at the isthmus, led to reproducibly good results in patients with a Vancouver B3 fracture and Paprosky type IIIA, IIIB, and IV defects with regard to union of the fracture, subsidence or loosening of the stem, and clinical outcomes.

How modular porous metal augments have changed the management of acetabular bone loss at primary or revision total hip arthroplasty.

The advent of modular porous metal augments has ushered in a new form of treatment for acetabular bone loss. The function of an augment can be seen as reducing the size of a defect or reconstituting the anterosuperior/posteroinferior columns and/or allowing supplementary fixation. Depending on the function of the augment, the surgeon can decide on the sequence of introduction of the hemispherical shell, before or after the augment. Augments should always, however, be used with cement to form a unit with the acetabular component. Given their versatility, augments also allow the use of a hemispherical shell in a position that restores the centre of rotation and biomechanics of the hip. Progressive shedding or the appearance of metal debris is a particular finding with augments and, with other radiological signs of failure, should be recognized on serial radiographs. Mid- to long-term outcomes in studies reporting the use of augments with hemispherical shells in revision total hip arthroplasty have shown rates of survival of > 90%. However, a higher risk of failure has been reported when augments have been used for patients with chronic pelvic discontinuity.

Gross Taper Failure and Fracture of the True Neck in Total Hip Arthroplasty: Retrieval Scanning Electron Microscope Analysis.

Background and objectives: wear and corrosion can lead to the gross failure of the Morse taper junction with the consequent fracture of the true neck of the prosthetic stem in hip arthroplasty. Materials and Methods: 58-year-old male patient, with a BMI of 38 kg/m2. Because of avascular necrosis, in 2007, a metal-on-metal total hip arthroplasty was implanted in him, with a TMZF stem and a Co-Cr head. In December 2020, he complained of acute left hip pain associated with the deterioration of his left leg and total functional impairment, preceded by the crunching of the hip. X-rays and CT scan showed a fracture of the prosthetic neck that necessitated prosthetic revision surgery. A Scanning Electron Microscope (SEM) analysis of the retrieved prosthetic components was conducted. Results: Macroscopically, the trunnion showed a typical bird beak appearance, due to a massive material loss of about half of its volume. The gross material loss apparently due to abrasion extended beyond the trunnion to the point of failure on the true neck about half a centimeter distal from the taper. SEM analysis demonstrated fatigue rupture modes, and the crack began close to the neck's surface. On the lateral surface, several scratches were found, suggesting an intense wear that could be due to abrasion. Conclusions: The analysis we conducted on the explanted THA showed a ductile rupture, began close to the upper surface of the prosthetic neck where the presence of many scratches had concentrated stresses and led to a fatigue fracture.

The influence of polyimide MP-1™ wear particles on a rodent closed fracture healing model.

Joint replacements provide pain free movement for the injured or our aging population. Current prothesis mainly consist of hard metal on metal, or ceramic femoral head on ultra-high-molecular weight polyethylene (UHMWPE). In this study, a rodent fracture model was used to test the influence of wear debris from a high-performance polymer (polyimide MP-1™). Saline, MP-1™ Low Dose in Saline (1%), or MP-1 High Dose (2%) in Saline was injected directly into a standard closed unilateral femoral fracture in 12-week old Sprague Dawley rats (n = 25) for 1, 3 and 6 weeks. Endpoints included radiography, micro-computed tomography, mechanical testing and paraffin histology. No adverse effects from the wear particles were observed from the current study based on radiology, mechanical or histological data. Although the particles were present, histological analysis revealed a progression in healing between the Polyimide treated groups and the non-treated saline control groups over the duration of 1, 3, and 6 weeks, with no inhibition from the particles. The MP-1™ wear debris generated are larger than 1 µm thus are not able to be engulfed by macrophages and cause osteolysis. This family of polymers (polyimides) may be an ideal material to consider for articulating joints and other implants in the human body.

Pelvic Pseudotumor Associated With a Ceramic Bearing Total Hip.

Pseudotumors have been well documented to occur most frequently in metal-metal bearing total hip arthroplasties and less frequently in metal-polyethylene bearings. There are few cases in the literature of pseudotumors occurring in ceramic-ceramic articulations. We report a case of a large pelvic pseudotumor in a patient with a ceramic-ceramic bearing articulation in a 67-year-old man. In addition to the usual investigations, we did a detailed wear analysis of the ceramic implants and an examination of the soft tissues for particulate debris. The detailed wear analysis did show evidence of stripe wear; however, the volumetric wear was within the expected range. Synchrotron imaging identified strontium and zirconium debris arising from the ceramic surfaces. Although association does not mean causation, no other cause for the large pseudotumor could be identified and presumably represents an idiosyncratic reaction to ceramic debris.

Fused hip conversion to total hip arthroplasty with the direct anterior approach: surgical technique on a regular surgical table under fluoroscopic guidance.

PURPOSE: Conversion of a fused hip to a total hip arthroplasty (THA) is technically challenging due to the loss of anatomical references. Here, a reproducible technique using the direct anterior approach (DAA) with a regular surgical table under fluoroscopic guidance is described, which has several advantages over traditional such as lateral or posterior approaches. METHODS: There were reported 11 cases of ankylosis hip that were converted to THA using the same surgical technique protocol. Clinical and radiographic outcomes were recorded at 3.2 years of follow-up. A detailed preoperative evaluation was performed, including a pelvis radiological evaluation and magnetic resonance image (MRI) to assess the integrity of the periarticular soft tissue and flexor muscles. RESULTS: The DAA has considerable advantages, such as allowing more precise targeting during surgery, avoiding the risk of pseudoarthrosis due to the absence of a trochanteric osteotomy, preserving the abductors, and allowing an easier-to-use of intraoperative fluoroscopy due to the supine position. Besides, the use of a standard table reduces surgical time and allows assessment of limb length, hip stability, and impingement in all planes in an intraoperative dynamic range, which decreases postoperative complications. CONCLUSION: Conversion from hip fusion to THA is a rare and complex procedure. The use of DAA with a standard table and fluoroscopy helps to avoid high complications since it allows a dynamic intra-operative examination of the range of motion to rule out impingements, reduces the risk of dislocation, and allows leg lengthening verification.

Experimental periprosthetic fractures with collarless polished tapered cemented stems.

PURPOSE: After cemented total hip arthroplasty, the risk of periprosthetic fracture (PPF) of taper-slip stems is higher than that of composite-beam stems. We aimed to assess the conditions resulting in PPFs of taper-slip stems using a falling weight. METHODS: Taper-slip stems were fixed to five types of simulated bone models using bone cement, and the fractures were evaluated by dropping stainless-steel weights from a predetermined height onto the heads. The periprosthetic fracture height in 50% of the bone models (PPFH50) was calculated using the staircase method. RESULTS: For the fixation with 0° of flexion, the values for PPFH50 were 61 ± 11, 60 ± 13, above 110, 108 ± 49, and 78 ± 12 cm for the cobalt-chromium-molybdenum alloy, stainless steel alloy (SUS), titanium alloy (Ti), smooth surface, and thick cement mantle models, respectively; for the fixation with 10° of flexion (considering flexure), the PPFH50 values were 77 ± 5, 85 ± 9, 90 ± 2, 89 ± 5, and 81 ± 11 cm, respectively. The fracture rates of the polished-surface stems were 78.6 and 35.7% at the proximal and distal sites, respectively (p < 0.05); the fracture rates of the smooth-surface stems were 14.2 and 100%, respectively (p < 0.05). CONCLUSION: The impact tests demonstrated that the conditions that were less likely to cause PPFs were use of Ti, a smooth surface, a thick cement mantle, and probably, use of SUS.

Dual-mobility tripod cup for revision hip arthroplasty: long-term (five to fourteen years) evaluation of a new generation cementless implant.

PURPOSE: The aims of this study were to evaluate the survivorships of a new generation cementless DMC with tripod additional fixation in revision total hip arthroplasty and complications at a minimum five year follow-up. METHODS: One hundred and fifteen revisions (THA) treated with tripod DMC performed between 2009 and 2015 were included in this retrospective study. Acetabular defects were classified as Paprosky 1 (n = 38, 33%), 2 (n = 75, 65%) or 3 (n = 2, 2%). Unipolar or bipolar revision was performed for the following indications: aseptic acetabular loosening (63%), infection (14%), aseptic bipolar loosening (11%), instability (4%), aseptic femoral loosening (3%), ALVAL (3%) and iliopsoas impingement (2%). Mean follow-up was 9.4 years ± two (range, 5 to 14). RESULTS: At the final follow-up, a single episode of dislocation occurred within three months after the procedure (0.8%) with no revision. Three cases of aseptic loosening were diagnosed (2.6%). Four infections (3.5%) required reoperation: three required a two stage bipolar revision; one was treated by DAIR procedure. At the latest follow-up, the survivorship of the acetabular cup for aseptic loosening was 98% [95% CI (91.2-99.4)] and for any reasons was 94.4% [95% CI (90.1%-98.9%)]; the mean HHS improved from 60 points (range, 18-94 points) to 83 points (range, 37-100 points) (p < .001). CONCLUSION: This study reports a low complication rate in favour of the use of a tripod DMC in revision THA with a satisfactory survivorship at a ten year follow-up.

Short versus conventional straight stem in uncemented total hip arthroplasty: functional outcomes up to 5 years and survival up to 12 years: secondary results of a randomized controlled trial.

BACKGROUND AND PURPOSE: To date, the mid- and long-term outcomes of the Collum Femoris Preserving (CFP) stem compared with conventional straight stems are unknown. We aimed to compare physical function at a 5-year follow-up and implant survival at an average of 10-year follow-up in an randomized controlled trial (RCT). METHODS: This is a secondary report of a double-blinded RCT in 2 hospitals. Patients aged 18-70 years with hip osteoarthritis undergoing an uncemented primary THA were randomized to a CFP or a Zweymüller stem. Patient-reported outcomes, clinical tests, and radiographs were collected at baseline, 2, 3, 4, and 5 years postoperatively. Primary outcome was the Hip disability and Osteoarthritis Outcome Score (HOOS) function in activities of daily living (ADL) subscale. Secondary outcomes were other patient-reported outcomes, clinical tests, adverse events, and implant survival. Kaplan-Meier and competing risk survival analyses were performed with data from the Dutch Arthroplasty Registry. RESULTS: We included 150 patients. Mean difference between groups on the HOOS ADL subscale at 5 years was -0.07 (95% confidence interval -5.1 to 4.9). Overall survival was 92% for the CFP and 96% for the Zweymüller stem. No significant difference was found. CONCLUSION: No significant differences were found in physical function at 5-year and implant survival at 10-year follow-up between the CFP and Zweymüller stems. When taking cup revisions into account, the CFP group showed clinically inferior survival.

Age as a Risk Factor for Intraoperative Periprosthetic Femoral Fractures in Cementless Hip Hemiarthroplasty for Femoral Neck Fractures: A Retrospective Analysis.

Background: Understanding the risk factors and outcomes of intraoperative periprosthetic femoral fractures (IPFF) during hip arthroplasty is crucial for appropriate perioperative management. Previous studies have identified risk factors for IPFF in total hip arthroplasty patients, but data for hip hemiarthroplasty (HA) is lacking. The aim of this study was to determine the age associated with increased rates of IPFF in patients undergoing HA. Methods: We retrospectively reviewed patients aged 65 years and above who underwent a cementless HA for a displaced femoral neck fracture and had a minimum of 1-year follow-up. Patients were stratified into five age groups (65-79, 80-84, 85-89, 90-94, and ≥ 95 years) and further divided into two subgroups (under 95 years and 95 years or older). The presence, location, and treatment of IPFF, as well as the effect of IPFF on the postoperative weight-bearing status, were compared between groups. A multivariate logistic regression was also performed. A total of 1,669 met the inclusion criteria and were included in the study. Results: The rates of IPFF were significantly higher for patients 95 years or older (p = 0.030). However, fracture location (greater trochanter fractures, p = 0.839; calcar fractures, p = 0.394; and femoral shaft fractures p = 0.110), intraoperative treatment (p = 0.424), and postoperative weight-bearing status (p = 0.229) were similar between the groups. While mortality and nonorthopedic-related readmissions were significantly higher for patients 95 years or older, orthopedic-related readmissions (p = 0.148) and revisions at the latest follow-up (p = 0.253) were comparable between groups. In a regression analysis, age over 95 years (odds ratio, 2.049; p = 0.049) and body mass index (odds ratio, 0.935; p = 0.016) were independently associated with IPFF. Conclusions: The findings of this study suggest that age over 95 years is a significant, independent risk factor for IPFF in patients undergoing cementless HA. Although we were unable to show an impact on perioperative outcomes and orthopedic complications, when operating on patients 95 years or older, surgeons should be aware of the increased risk of IPFF and consider the use of stem designs and fixation types associated with decreased IPFF rates.

The size of the femoral head does not influence metal ion levels after metal-on-polyethylene total hip arthroplasty: a five-year report from a randomized controlled trial.

Aims: In metal-on-polyethylene (MoP) total hip arthroplasty (THA), large metal femoral heads have been used to increase stability and reduce the risk of dislocation. The increased size of the femoral head can, however, lead to increased taper corrosion, with the release of metal ions and adverse reactions. The aim of this study was to investigate the relationship between the size of the femoral head and the levels of metal ions in the blood in these patients. Methods: A total of 96 patients were enrolled at two centres and randomized to undergo MoP THA using either a 32 mm metal head or a femoral head of between 36 mm and 44 mm in size, being the largest possible to fit the thinnest available polyethylene insert. The levels of metal ions and patient-reported outcome measures (Oxford Hip Score, University of California, Los Angeles Activity Scale) were recorded at two and five years postoperatively. Results: At five years, the median levels of chromium, cobalt, and titanium were 0.5 µg/l (interquartile range (IQR) 0.50 to 0.62), 0.24 µg/l (IQR 0.18 to 0.30), and 1.16 µg/l (IQR 1.0 to 1.68) for the 32 mm group, and 0.5 µg/l (IQR 0.5 to 0.54), 0.23 µg/l (IQR 0.17 to 0.39), and 1.30 µg/l (IQR 1 to 2.05) for the 36 mm to 44 mm group, with no significant difference between the groups (p = 0.825, p = 1.000, p = 0.558). There were increased levels of metal ions at two years postoperatively in seven patients in the 32 mm group, compared with four in the 36 mm to 44 mm group, and at five years postoperatively in six patients in the 32 mm group, compared with seven in the 36 mm to 44 mm group. There was no significant difference in either the OHS (p = 0.665) or UCLA (p = 0.831) scores between patients with or without an increased level of metal ions. Conclusion: In patients who underwent MoP THA, we found no differences in the levels of metal ions five years postoperatively between those with a femoral head of 32 mm and those with a femoral head of between 36 mm and 44 mm, and no corrosion-related revisions. As taper corrosion can start after five years, there remains a need for longer-term studies investigating the relationship between the size of the femoral head size and corrosion in patients undergoing MoP THA.

Mid-term results of total hip arthroplasty with anatomical ultra-short cementless stem in patients with developmental dysplasia of the hip Crowe type II.

The aim of this study was to present the mid-term results of ultra-short cementless stem total hip arthroplasty (THA) in patients with Crowe type II developmental dysplasia of the hip. The study consists of 68 patients (75 THAs) with a Proxima stem implanted between 2006 and 2015. The clinical results include Harris Hip Scores. Radiological follow-up reports on stem migration, bony trabecular development and radiolucent lines. Kaplan-Meier survival analysis was performed. The mean age of patients was 48.4 years, with a mean follow-up 114 months. The average Harris Hip Score improved significantly from 45.1 preoperatively to 97.6 at the final evaluation (p < 0.001). Stem migration was observed in five hips (in all of them up to the 6th postoperative month, without any further progression of migration or radiological loosening). Bony trabecular development was detected in modified Gruen zones (1, 2, 4, 6, 7 for Proxima stem): in zone 1 (0%), 2 (49.3.0%), 4 (38.7%), 6 (82.7%), 7 (0%). Radiolucent lines were observed around one cup (DeLee and Charnley zone I) and three stems (none was loose, all three with fibrous stable fixation). Complications were found in three hips (4.0%): intraoperative periprosthetic femoral fracture (threated with cerclage wire) in two hips and squeezing hip in one patient (with perioperative ceramic inlay breakage and exchange). No hip was revised. The implant survival was 100.0% both clinically and radiologically. Observations in the mean follow-up of 114 months show that the results (clinical and radiological) of the Proxima stem in patients with Crowe type II DDH are promising.

High femoral offset as a risk factor for aseptic femoral component loosening in cementless primary total hip arthroplasty.

PURPOSE: Lateralized stems in primary cementless total hip arthroplasty (THA) showed to be associated with aseptic femoral loosening. However, femoral head length also affects femoral offset but was not considered so far. This study analyzed the impact of high femoral offset (hFO) combinations, formed by lateralized stems or large femoral head lengths, on aseptic femoral component loosening. METHODS: Retrospective cohort study was performed including all patients that underwent primary cementless THA at our institution between July 2004 and December 2016. Patients were screened for aseptic femoral component loosening and grouped in aseptic loosening (AL) and non-aseptic loosening (nAL) group. Medical records were screened; implant details were noted and classified in hFO and standard femoral offset (sFO) combinations. Supposed risk factors for aseptic loosening were analyzed. RESULTS: Two thousand four hundred fifty-nine THA could be included, containing 14 THA (0.6%) with aseptic femoral component loosening. The AL group contained 11 hFO combinations (78.6%), whereas in the nAL group, 1315 hFO combinations (53.8%) were used. Subgroup analysis showed significant difference between two groups for hFO combinations (p = 0.014), age (p = 0.002), NSAR (p = 0.001), and bilateral THA on same day (p = 0.001). The multiple logistic regression analysis showed that hFO combination was the only variable for increased probability of aseptic loosening (OR, 3.7; p = 0.04). CONCLUSION: High femoral offset combinations, formed by lateralized stems or large femoral head lengths in our collective of standard straight stems implanted by an anterior approach, show a 3.7-fold increased probability for aseptic femoral component loosening. Adjustment of the postoperative protocol may be considered in these cases to ensure proper stem ingrowth.

Comparison of osteolysis around 3 different cement restrictors in total hip arthroplasty.

BACKGROUND AND AIM: Several studies reported osteolysis around polyethylene glycol/polybutylene terephthalate (PEG/PBT) based femoral cement restrictors. Our goal was to evaluate and compare osteolysis around 3 different plug designs: the slow biodegradable PEG/PBT cement restrictor; the fast biodegradable gelatin cement restrictor; and the non-biodegradable polyethylene plug. PATIENTS AND METHODS: In a retrospective multicentre cohort study chart data were extracted of patients who received a total hip arthroplasty between 2008 and 2012. A total of 961 hips were included. Cortical ratio between inner and outer cortices at the centre of the plug was measured on routine postoperative follow-up moments. Median follow up of all 3 hospitals was 3.5 years (1.4-7.3). The primary outcome was evidence of osteolysis (i.e. the difference in cortical ratio [CR]) on anteroposterior (AP) radiographs at final follow-up. RESULTS: Progressive osteolysis was found around the PEG/PBT cement restrictor represented by a significantly increasing cortical ratio (ΔCR 0.067 (95% CI, 0.063-0.071). Distance from tip prosthesis to plug and size of the plug were found to be independent factors in predicting increased cortical ratio. CONCLUSIONS: Our multicentre cohort shows increase of cortical ratio around the PEG/PBT cement restrictor which progresses over time. Physicians should be aware of this fact and are advised to intensify follow-up of patients who received this cement restrictor.

Cobalt-chromium toxicity following revision of total hip replacement.

Systemic cobalt-chromium (Co-Cr) toxicity following a total hip replacement is a rare complication that may sometimes lead to fatal consequences. We report a case of a 64-year-old woman, who presented with Co-Cr toxicity after revision of fractured ceramic components with metal-on-polyethylene. Systemic toxicity occurred a year after surgery and was expressed brutally with mostly central neurological symptoms. Revision surgery allowed rapid regression of all symptoms. Prosthetic revision with a metal bearing surface after a history of fracture of the ceramic bearing component should be avoided. Orthopedic surgeons and the different medical actors should be aware of this rare but serious complication to allow earlier management. Above all, multidisciplinary management is primordial to allow correct diagnosis and appropriate treatment.

Monobloc dual-mobility acetabular component versus a standard single-mobility acetabular component.

Aims: The benefit of a dual-mobility acetabular component (DMC) for primary total hip arthroplasties (THAs) is controversial. This study aimed to compare the dislocation and complication rates when using a DMC compared to single-mobility (SM) acetabular component in primary elective THA using data collected at a single centre, and compare the revision rates and survival outcomes in these two groups. Methods: Between 2010 and 2019, 2,075 primary THAs using either a cementless DM or SM acetabular component were included. Indications for DMC were patients aged older than 70 years or with high risk of dislocation. All other patients received a SM acetabular component. Exclusion criteria were cemented implants, patients treated for femoral neck fracture, and follow-up of less than one year. In total, 1,940 THAs were analyzed: 1,149 DMC (59.2%) and 791 SM (40.8%). The mean age was 73 years (SD 9.2) in the DMC group and 57 years (SD 12) in the SM group. Complications and revisions have been analyzed retrospectively. Results: The mean follow-up was 41.9 months (SD 14; 12 to 134). There were significantly fewer dislocations in the DMC group (n = 2; 0.17%) compared to the SM group (n = 8; 1%) (p = 0.019). The femoral head size did not influence the dislocation rate in the SM group (p = 0.702). The overall complication rate in the DMC group was 5.1% (n = 59) and in the SM group was 6.7% (n = 53); these were not statistically different (p = 0.214). No specific complications were attributed to the use of DMCs. In the DMC group, 18 THAs (1.6%) were revised versus 15 THAs in the SM group (1.9%) (p = 0.709). There was no statistical difference for any cause of revisions in both groups. The acetabular component aseptic revision-free survival rates at five years were 98% in the DMC group and 97.3% in the SM group (p = 0.780). Conclusion: The use of a monobloc DMC had a lower risk of dislocation in a high-risk population than SM component in a low-risk population at the mid-term follow-up. There was no significant risk of component-specific complications or revisions with DMCs in this large cohort.